Quote:I can get video to the TV, but my problem is that that the TV seems to scale everything. I've selected it as a 1920x1080 secondary monitor, but there is about a 2" gap from the edges of the screen to the video and my TV is scaling everything to fit in the reduced space. I have no way of knowing what the actual resolution is, but it certainly isn't 1080p. The same videos played on my computer monitor are very sharp and crisp.

Quote:Try switching between "16:9" and "Just Scan" modes on your TV, they may be named slightly differently.

Quote:I have a pretty decent computer with a pretty decent video card and I'd like to use it to serve HD video to a 42" 1080p flat panel TV.

http://www.bfgtech.com/bfge96512gte.aspx
http://www.amazon.com/Panasonic-TH-42PZ77U...V/dp/B000V5DK2O

Those are links to the video card and the TV. The video card has dual DVI outputs, and the TV has HDMI inputs. I have a DVI-to-HDMI cable.

I can get video to the TV, but my problem is that that the TV seems to scale everything. I've selected it as a 1920x1080 secondary monitor, but there is about a 2" gap from the edges of the screen to the video and my TV is scaling everything to fit in the reduced space. I have no way of knowing what the actual resolution is, but it certainly isn't 1080p. The same videos played on my computer monitor are very sharp and crisp.

Does anyone have a media center PC and uses it to serve up 1080p media to a TV that can help me? I'm totally out of my element on this one.

Quote:but I get the feeling that I should be using one of these fancy digital audio ports instead.

Quote:Yes, either an S/PDIF Digital or an Optical (TOSLINK) connection will send all but the highest quality signal (they can't handle Dolby TrueHD or DTS HD codecs), while a standard headphone jack will only be 2 channels and have more signal problems. Over short runs the two are pretty equal; over long runs optical degrades less.

Quote:I had a chance to play around with this and I finally got this working correctly by playing around with the Nvidia settings. The problem I was having was due to the fact that Nvidia likes to have monitor 1 on the left side, and my main computer monitor isn't on that side. My computer is to the right of the HDTV. I was erroneously setting a screen resolution of 1680x1050 on my HDTV instead of 1920x1080.

Once I realised this, I just had to set the Nvidia drivers to "dual view" with the HDTV as monitor 2 and my main monitor as #1, and just mentally adjust for when I drag windows over to the right (which ends up on my left, where my HDTV is).

Quote:I don't get it. I have my monitor and T.V. set up as CLONE with the Custom Resolution of 1920x1080 for my Toshiba 63" HDTV and 1280x1024 for my 20" LG flat panel, yet the output from my computer is still about 1" smaller than the edge of the screen on the Toshiba... no matter what! I don't quite understand what I'm doing differently than you are.

Quote:I tried messing around with the clone setting, and I'm pretty sure it is using the 1280x1024 resolution you set for your LG monitor and applying it to the HDTV.

Have you tried using the dual view setting like I did?

Quote:No. I'll give it a shot in a few minutes after I catch up on my daily reading.

Quote:Huh, it worked. Nice. Only prob I'm having now is that the projected image is about 1/2" from the top of the T.V. so I want to move it. NVidia can only move the image around if it's CRT and I can't seem to find any image moving tool on the control panel. And I can't find any control for moving the image on my T.V. either... Oh well, at least it covers 95% of the visible screen now.